We will be offering mothur and R workshops throughout 2019. Learn more.

Difference between revisions of "Make.contigs"

From mothur
Jump to: navigation, search
Line 150: Line 150:
* 1.38.0 - Removes indexFile requirement for using NONE option in oligos file.
* 1.38.0 - Removes indexFile requirement for using NONE option in oligos file.
* 1.38.0 - Skips blanks files and continues.
* 1.38.0 - Skips blanks files and continues.
* 1.38.1 - Fixes filename expansion issue. http://www.mothur.org/forum/viewtopic.php?f=3&t=5869&p=14857#p14857

Revision as of 19:27, 9 August 2016

The make.contigs command reads a forward fastq file and a reverse fastq file and outputs new fasta and report files.

Default Settings

The make.contigs command parameters are file, ffastq, rfastq, ffasta, rfasta, fqfile, rqfile, findex, rindex, oligos, format, tdiffs, bdiffs, pdiffs, align, match, mismatch, gapopen, gapextend, insert, deltaq, allfiles and processors.

mothur > make.contigs(ffastq=test_1.fastq, rfastq=test_2.fastq)

or (Mac and Linux only)

 mothur > make.contigs(ffastq=test_1.fastq.gz, rfastq=test_2.fastq.gz)


mothur > make.contigs(file=combo.file)


mothur > make.contigs(ffastq=forward.fastq, rfastq=reverse.fastq, findex=forwardIndex.fastq, rindex=reverseIndex.fastq)


mothur > make.contigs(ffasta=test_1.fasta, rfasta=test_2.fasta, rqfile=test_1.qual, fqfile=test_1.qual)

This command will create a test_1.contigs.trim.fasta, test_1.contigs.scrap.fasta, test_1.trim.contigs.report and test_1.scrap.contigs.report file.



The file parameter is 2, 3 or 4 column file containing the fastq files. Tired of creating the file file? Let mothur help with the make.file command!

The 2 column format consists of the forward fastq file in the first column and their matching reverse fastq files in the second column. This type can be used with an oligos file create a group file for your dataset.

small.forward.fastq	small.reverse.fastq
test.forward2.fastq	test.reverse2.fastq

The 3 column format is used for datasets where the sequences have already had the barcodes and primers removed and been split into separate files. The first column is the group, the second is the forward fastq and the third column contains the reverse fastq.

F8D0	F8D0_S345_L001_R1_001.fastq	F8D0_S345_L001_R2_001.fastq
F8D125	F8D125_S358_L001_R1_001.fastq	F8D125_S358_L001_R2_001.fastq
F8D141	F8D141_S359_L001_R1_001.fastq	F8D141_S359_L001_R2_001.fastq
F8D142	F8D142_S360_L001_R1_001.fastq	F8D142_S360_L001_R2_001.fastq
F8D143	F8D143_S361_L001_R1_001.fastq	F8D143_S361_L001_R2_001.fastq
F8D144	F8D144_S362_L001_R1_001.fastq	F8D144_S362_L001_R2_001.fastq
F8D145	F8D145_S363_L001_R1_001.fastq	F8D145_S363_L001_R2_001.fastq
F8D146	F8D146_S364_L001_R1_001.fastq	F8D146_S364_L001_R2_001.fastq
F8D147	F8D147_S365_L001_R1_001.fastq	F8D147_S365_L001_R2_001.fastq
F8D148	F8D148_S366_L001_R1_001.fastq	F8D148_S366_L001_R2_001.fastq
F8D149	F8D149_S367_L001_R1_001.fastq	F8D149_S367_L001_R2_001.fastq
F8D150	F8D150_S368_L001_R1_001.fastq	F8D150_S368_L001_R2_001.fastq

The 4 column format is for use with index files. The format is forward fastq file then reverse fastq then forward index and reverse index file. If you only have one index file add 'none' for the other one. Here's an example with just a reverse index file:

My.forward.fastq My.reverse.fastq none My.index.fastq

Mothur will process each pair and create a combined fasta and report file with all the sequences.

ffastq & rfastq

The ffastq and rfastq parameters are used to provide a forward fastq and reverse fastq file to process. If you provide one, you must provide the other.

ffasta & rfasta

The ffasta and rfasta parameters are used to provide a forward fasta and reverse fasta file to process. If you provide one, you must provide the other.

fqfile & rqfile

The fqfile and rqfile parameters are used to provide a forward quality and reverse quality files to process with the ffasta and rfasta parameters. If you provide one, you must provide the other.

findex & rindex

The findex and rindex parameters are used to provide a forward index and reverse index files to process. If you use an index file, you must provide an oligos file.

The index file is a fastq file containing barcodes for the reads. It looks like:

@M00704:50:000000000-A3G0K:1:1101:15777:1541 1:N:0:0
@M00704:50:000000000-A3G0K:1:1101:15370:1541 1:N:0:0


The format parameter is used to indicate whether your sequences are sanger, solexa, illumina1.8+ or illumina, default=illumina1.8+.


The oligos option takes a file that can contain the sequences of the paired primers and barcodes and their sample identifier. Each line of the oligos file can start with the key words "primer" and "barcode" or it can start with a "#" to tell mothur to ignore that line of the oligos file. Here's an example:

BARCODE	ccaac	cactg	F01R2A
BARCODE	ccaac	aacca	F01R2B
BARCODE	ccaac	tgtca	F01R2C
BARCODE	ccaac	aaacc	F01R2D
mothur > make.contigs(ffastq=test_1.fastq, rfastq=test_2.fastq, oligos=test.oligos)

bdiffs & pdiffs & tdiffs

These parameters are used to allow differences in the barcode and primers. pdiffs is maximum number of differences to the primer sequence, default=0. bdiffs is maximum number of differences to the barcode sequence, default=0. tdiffs is maximum total number of differences to the barcode and primer (default to pdiffs + bdiffs).


If you are running the make.contigs command with paired barcodes or primers, you can use the checkorient parameter. When checkorient=t and mothur can't find the barcodes and primers, it will search the reverse compliment. The default is false.


The align parameter allows you to specify the alignment method to use. Your options are: gotoh and needleman. The default is needleman.

mothur > make.contigs(ffastq=test_1.fastq, rfastq=test_2.fastq, align=gotoh)

match & mismatch & gapopen & gapextend

These parameters are used while aligning the sequence read to determine the overlap. The match parameter allows you to specify the bonus for having the same base. The default is 1.0. The mistmatch parameter allows you to specify the penalty for having different bases. The default is -1.0. The gapopen parameter allows you to specify the penalty for opening a gap in an alignment. The default is -2.0. The gapextend parameter allows you to specify the penalty for extending a gap in an alignment. The default is -1.0.


The insert parameter allows you to set a quality scores threshold. When we are merging the overlapping regions, in the case where we are trying to decide whether to keep a base or remove it because the base is compared to a gap in the other fragment, if the base has a quality score below the threshold we eliminate it. Default=20.


The deltaq parameter allows you to specify the delta allowed between quality scores of a mismatched base. For example in the overlap, if deltaq=5 and in the alignment seqA, pos 200 has a quality score of 30 and the same position in seqB has a quality score of 20, you take the base from seqA (30-20 >= 5). If the quality score in seqB is 28 then the base in the consensus will be an N (30-28<5) The default is 6.


With the barcodes it is possible to sequence many different samples in a single run. It may happen that some of these samples should not be analyzed together for your analysis. To parse apart the sequences that belong to each sample, use the allfiles option. This will generate a fasta and groups file for each barcode defined in your oligos file:


The trimoverlap parameter allows you to trim the sequences to only the overlapping section. The default is F. Use this option if you have 2x300bp sequences that are longer than your amplicon.


Renames sequences to reduce file sizes and greatly reduce the size of the column formatted distance matrix downstream. Uses the rename.seqs command to rename which creates a map file so you can revert to original names at any time. Default=F.


The processors parameter allows you to specify how many processors you would like to use. The default is 1.

Assembled Quality Scores

The assembled quality scores outputted by mothur cannot be used for downstream quality screening. The score calculations are modeled after pandseq's method. Here's a link to the explanation from their documentation, https://github.com/neufeld/pandaseq#the-scores-of-the-output-bases-seem-really-low-whats-wrong.


  • 1.26.0 - First Introduced
  • 1.30.0 - Officially released
  • 1.31.2 - Bug Fix: - http://www.mothur.org/forum/viewtopic.php?f=3&t=2451
  • 1.32.0 - Bug Fix: if file option is used with group provided, and one or more files contain less good reads than number of processors, group assignments were incorrect. - http://www.mothur.org/forum/viewtopic.php?f=4&t=2571&p=7025#p7025
  • 1.32.0 - Added findex and rindex parameters. Modified file options to add 4 column option - ffastq rfastq findex rindex. May use NONE as option for findex and rindex. Modified oligos file option to allow none as option for paired barcodes for index files. BARCODE NONE GCTGATGAGCTG Group1 would indicate you have a reverse index file, but no forward index file.
  • 1.34.0 - Added checkorient parameter. - http://www.mothur.org/forum/viewtopic.php?f=3&t=2993.
  • 1.36.0 - Bug Fix: when using index files in version 1.35 quality data was over trimmed by the length of the barcode.
  • 1.36.0 - allow for missing reads in files.
  • 1.36.0 - allow for gzipped version of fastq files as inputs. Mac and Linux only.
  • 1.37.0 - Adds rename parameter. #132
  • 1.37.0 - Bug Fix: File mismatch error with certain sequence name formats and multiple processors. Three column format gz file not producing group file.
  • 1.37.0 - Bug Fix: Fixes name mismatch error for rare names and gives a slight speed boost. #167
  • 1.38.0 - Removes indexFile requirement for using NONE option in oligos file.
  • 1.38.0 - Skips blanks files and continues.
  • 1.38.1 - Fixes filename expansion issue. http://www.mothur.org/forum/viewtopic.php?f=3&t=5869&p=14857#p14857